Some time ago, I noticed that some water has accumulated under my ECAM 23.266.B. I screwed it on once today and was able to find the source of the problem. I unscrewed the machine today and was able to find the source of the problem. Water only comes out when hot water is drawn and it drips from the supply hose or from the connection. Sorry for the probably wrong names I have attached a picture of the leak. Can you guys help me fix it? I would have liked to remove the hose or the connection and check the seal, but unfortunately I did not succeed and I did not want to use too much force. Maybe it would help me to know how I can remove this part and replace it if necessary.
I think you have removed the clamp before. If the hose is not tight from the lime, it should come out. You can pull a little hard on it. Hold the membrane regulator with the other hand. Not that he breaks at the screw connection. A new hose seal, then it should be tight again.
Super, thanks for the tip. With a small pair of pliers it worked after all. The seal actually has a small crack. And of course I had removed the metal hook beforehand .
close
Share this post: