Good morning
, I have a problem with the Verobar 100 Aromapro that the "short rinse milk system" does not work
properly.
Milk foam preparation etc. works perfectly.
Only when I perform "Short rinse milk system", the following
happens: The glass
is filled
normally with some water.
Then the flushing of the hose should start and afterwards some clear water should flow through the milk frother (this is how it is with my other TES70151DE).
But the rinsing takes only half a second and then the appliance switches off.
Is the control down now, or can someone tell me if there is another/easy solution to this problem?
Thanks in advance!!!!!
close
Share this post: