ENA Micro 90 15116
I recently refurbished the brew group, but when I reassemble the machine and power it up, the brew group motor drives the big white brew group gear all the way to the top and just keeps on running - grinding on the bottom of the long gear on the outside of the brew group. All the noises and motions seem normal up to that point. I've tried several different starting positions, but they all result in the same ending. Prior to doing all this, the machine was struggling, and I'd sometimes see Error 8, but I never saw this symptom before. I suspect that I may have a bad encoder, but I'm hoping you can advise me with some other things to check first.
close
Share this post: