Advanced search

back

New Topic

Siemens Eq. 6 Water runs in drip tray

Siemens Eq. 6 Water runs in drip scarf

Gast_Manuel

November 29, 2020 03:31 pm

Unregistered

Hello
, I have a problem with my Siemens Eq.6. during the rinsing process and while preparing coffee, little water or coffee comes out of the nozzles. It lands much in the drip tray. I have installed the brewing unit in another machine for testing. There it runs without problems. What could be the cause if the brewing unit is intact?

Stephane

March 03, 2021 11:52 am

Unregistered

Hello,

I have the same problem you answered your Question.

Thank you in advance

Gast_Jan

May 08, 2023 05:25 am

Unregistered

QUOTE (Guest_Manuel @ Sunday, November 29, 2020, 15:31 PM)
Hello,
have a problem with my Siemens Eq.6. When rinsing and preparing coffee, little water or coffee comes out of the front of the nozzles. A lot ends up in the drip tray. The Bruheinheit I have testhalber installed in another machine. There it runs without problems. What could be the cause, if the brewing unit is intact?

Hello, I had the same problem. I removed the ceramic valve and disassembled it. Siege da, one of the small holes on the ceramic discs was slammed shut. Drilled out with a mini drill and cleaned, screwed together and since then works again.
wink.gif

back

New Topic

Print this topic
Next Oldest Next Newest