|QUOTE (Gast_Florian @ Thursday, 07. February 2019) February 2019, 21:41)|
| I mean the switch that moves the brewing group lever in the first place. This is located on the housing:|
> Beans are ground for approx. 2 seconds. Then the grinder stops, the display reads "Please wait" and then the mentioned error message appears.
That is, after the grinder has stopped and the display reads "please wait", the brewing group does not move to the brewing position - correct?
And then the message "Fill bean container" appears?
I would also tap the motherboard.
Or the microswitch on the brewing head is possibly there.
Normally the brewing group drives to the brewing head in brewing position after grinding.
If there is no coffee powder in the brewing group, the electronics register it because the microswitch on the brewing head is not pressed. Then comes said message.
Functioning's with ground coffee?