Manufacturer: Bosch | Type/Model: TES50251EN - VeroCafe | approx. Year of manufacture: Unknown
Hello, everyone,
I have a Bosch TES50251, purchased as defect was indicated as does not pump water.
I have completely disassembled and cleaned the machine andreplaced
all seals. -
Brewing unit disassembled, cleaned, greased, seals replaced. -
Flow heater disassembled, cleaned, seals changed, everything free and no
lime. -
Ceramic valve disassembled and cleaned, seals replaced
.
- Pump disassembled and cleaned, seals changed there also no limescale only green crumbs or algae? Function given when the machine is switched on.
- Flowmeter disassembled and cleaned, seals changed as far as free running.
Nevertheless,
after the measures described above, only about 2ml coffee came out of the spout and some steam at the steam nozzle most of the water was in the bowl the powder was more or less wet rather dry during further tests.
Could it be
the pump? Or other components.
---------------------------------------------------------------------------------------------------------------------------------------- Another
problem with the
grinder running I cannot adjust the grinding degree I have possibly installed the adjustment knob incorrectly or why is it jammed so extremely.
close
Share this post: