I have owned a Siemens EQ6 for about 3 years and have had the following problem for about 2 weeks: water collects under the machine (under the drip tray).
I opened it sideways today to see if there were any wet spots inside. On the side where the water tank is everything is dry, I assume that this side can be excluded. On the other side I could not find any wet spots. I don't want to disassemble it completely.
Coffee works and it's not much, but over time it collects and it's already decently wet.
I have changed the rings on the brew group all, also this has brought no success. Also, I have during the brewing process once the cover and the coffee grounds left out to see if possibly there somewhere water runs, but even there it looks rather dry.....ich despair :-)
At the bottom, where the ribs are in the housing at the bottom, it is wet.
Here is a picture of the interior of the brew group
F9df
June 18, 2021 06:36 pm
Unregistered
Hallöchen, with us it was once the ceramic valve. Replacing it was a bit complex, there's also a YT video. Unfortunately, we have the same problem after 1 year again with the water under the machine. And I have zero desire to disassemble the thing again.
close
Share this post: