Hello
I have a problem, I don't know what else to do
The device has worked with agonizing noises from drive I have cleaned it disassembled cleaned greased it works again normally.
Then I cleaned the drainage valve and installed it. After that it did not work anymore.
Then I read that the drain valve is
defective and bought a new one.
I accidentally bought a new version instead of the old one and replaced the driver of the actuator because I thought that one of the brackets was broken and that this could be the fault.
Coffee is coming out of the bottom left side and the coffee grinder is dry as normal.
As I have tested, one of the pins of the driver is broken off and it does not turn (did I screw it tight?
) As I removed the BG, the lower side was stuck and was no longer moveable. Now it works
again (maybe there is something
wrong with it).
I hope you could help
me Thank you
close
Share this post: