Hello,
The XP 9000 is first opened from the rear, then the top cover is removed and then the side panels can be removed.
If you can't find a detailed manual for the XP 9000 then try a similar one..e.g. Siemens Surpresso.
The BND coffee studio has opening instructions for the Surpresso.
If you say that the fuses fly out, then I assume that you mean the FI switch in the house electrical system...It triggers if in the machine the electrical system has a fault... this fault signal system has in the machine the green striped cables.
If the Fi switch of the house electrical system triggers, then usually in the XP 9000 the electromagnetic valve is defective (steam valve or also solenoid valve called) and must be exchanged, it regulates the purchase of water or steam or coffee.
Otherwise, the 3-5 cm long inlet hose to the instantaneous water heater could also be defective, so that the water runs onto the electrical system and triggers
the fault current.
I hope you can do something with that help.
close
Share this post: