jura impressa Xs 90 one touch

Hello got a problem with my jura impressa xs 90 one touch





I don't get coffee or water and steam from my machine when rinsing and decalcifying, nothing works either!
has it screwed on thereupon and the individual circuits followed something
as far as possible, i have the assumption that this distributor with the DC motor does not work properly, it gets a pulse 24 volt but the mixer does not distribute any more and it only runs over this overflow, what kind of error could it be?

or could it be clogged anywhere else




or a component broken?

Something's gonna be clogged. Can be quite a lot with the Xs90 *gg*

Only slow canting helps. In other words, attach a hose to the diaphragm regulator directly after the pump and see if there is anything else to come. The whole thing then goes on via the thermoblocks, the automatic ceramic valve etc...

thanks!!!!

I got as far as this distributor but from there it doesn!!!!!
I can!t go any further, then I unscrewed it and cleaned the nozzles and so nothing works, still..........................................................3333;!!> !> where is the construction completely described with components of the machine?

another question about the machine :

where can i get the cheapest spare parts for the jura?

Right by the law.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.