A good evening, I am new here in the forum and have a question about my coffee machine. Currently it is so that I can turn on the machine. However, when I start a coffee reference the machine switches off directly. Now I have opened the machine. Somehow I suspected that the drive is defective. When opening the machine I had to adjust:
1) White smear on the hoses and on the plastic part in the housing2 ) the grinder or the temperature sensor is very sootyWollen
I would like to know if someone has a similar problem and can possibly give a tip. Furthermore, I would like to know if point one &. Two occur more often or could indicate a defect.
Furthermore, I also started the service menu and found that the machine also goes off during the component test at "Brew up".
close
Share this post: