System error 8

Hello all samt.
Good advice for system error 8.
This is on the main board.Machine starts and Stopt.Then appears
system error8.Here the machine no longer knows what to do.It jams
the brewing group because it was still started and in the program does not continue to run


.



Repair possible but somewhat expensive.machine open main board out and new reinschon
runs again everything.open the drive cover and with a 9volt battery the engine wiederin
the

basic position bring.AAAAAber caution

.

Do not connect the motor with the circuit board before the motor was brought into the basic position.Otherwise there is immediately again the system error 8 because the circuit board consumes.If you take everything to heart there is again very good coffee
.