Have a good evening!
Have for some time the problem that in the descaling program no more water comes out of the coffee spout. From the milk frother already. The machine switches cyclically between the coffee circuit and milk / hot water, but no rinse water comes out of the coffee spout.
Normal coffee / espresso can be obtained, it also comes rinse water when switching on and off. As far as i.O.
Just not when descaling, the water that should actually come out of the coffee spout, then collects only in the drip tray.
That's why I also apparently silt the drain funnel again and again quite enormous. Ergo machine disassemble and funnel disassemble / clean.
The Minuto is about 7 years old and has been replaced so far boiler, brew group, various hoses, as well as the pressure relief valve and also the outlet valve. The connection raccord to the outlet valve is tight. (So does not leak!)
Thinking of a directional valve, but which? It has two if I remember correctly.
Or even something completely different???
Thank you very much for your tips!
Saeco Minuto (HD8763)
close
Share this post: