Hello all,
I have removed the grinder of my DeLonghi coffee machine, because a small piece of wood was jammed here.
In addition, the balls, which are on the spring, jumped out.
Then I removed the piece of wood, which was in a bean packet, and put the balls back on the springs. After putting the machine back together and giving it a test run, I noticed right away that the balls popped out again.
What could be the reason for this, that the balls do not stay at the certain position, but that they jump out again and again with a new grinding process?
Thanks in advance for any feedback.
Many greetings
close
Share this post: