Advanced search

Replacement for Saeco Magic Comfort Plus

New or repair?

nocheinPoet

October 15, 2021 07:54 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 34018

Joined: March 30, 2019

Hi,

The brewing group of my fully automatic machine is blocked, there is really nothing more. After some vigorous attempts, the machine now also says the brew group is missing.

I love the machine, has served me faithfully for 10 years.

If I bring it to Eckernförde for repair, I have to drive more than 100 km, in total it will be 400 km and the repair will probably not be possible for less than 200.

Currently I put some in the car, also had to have times again TÜV and new wishbones and whatever everything, then fuel oil, just 1000 euros for a new machine is hard where to cut from the ribs.

Also, all the machines have yes so many bells and whistles, I do not want to talk to the fully automatic, it does not need wifi, BT and also does not need to be operated via an app.

Like Musk says, best part is the part you don't need.

I have to say, I have not put much care in there, descale and a new brew group and good.

And the Macic went well.

If I buy a new one, it should last and need as little maintenance as possible. Have already read the tests, since no one can see through more.

Or a used one from ... ?

Without coffee I'm spinning my wheels, can't do it at all, I'm going kaput.

Also still on Friday, now I am in the village, thermos flask for 20 euros, filter number 6, once Mövenpick and Dallmayr prodomo, the Mövenpick will probably bring me over the next week.

Is yes with many devices today so, in former times VW bus, the old ones, which hold, also if I am from the IT, my full automat does not have to possess really a screen and a computer, believe hardly that even the devices for 1000 euros today still 10 years hold.

What do you guys have to say about it?

Recommendation for a new alternative to macic?

Love

neP


Schlawi

October 16, 2021 10:38 am

*

Expert

Group: Mitglieder

Posts: 1102

Member No.: 14628

Joined: December 26, 2011

What have you tried?
Usually the transistor is defective. (TIP33C) is located
on the heat sink of the board
.



nocheinPoet

October 16, 2021 08:45 pm

*

Coffee drinker

Group: Mitglieder

Posts: 3

Member No.: 34018

Joined: March 30, 2019

Okay, well...

thanks for the tip, that would be an idea.

I'll have to take a look.