Caffeo Solo & Milk

Hello
,after I have replaced the grinder in my Caffeo solo&milk now lights the steam standby permanently. (A screw was - however - got into the grinder)

I have opened the valve for steam / water to vent

.

The water came immediately and in expected quantity, but the steam ready light remained permanently on and coffee withdrawal was not possible. After opening the machine again, I could not find any loose wires or anything, everything seems in place.

A factory reset did not help.

Although the machine is heavily used, I don't think the flowmeter has broken.

Anyone have any ideas what is wrong here?

VG Caff-olli

I have mom the same problem! What have you done?

Unfortunately no good news: so far I could not find a solution. Possibly it would help to exchange the flow meter (am not sure of the name) also, but that is pure speculation.
If I ever find the time, I will send the machine in. There are meanwhile offers on the Internet, which repair broken-repaired devices again. For example kaputt.de

Mal the flowmeter taken apart and cleaned?
Be careful when reassembling!
Below the hose from the tank, above the hose to the pump
!