Posted by: Gast_Nobody January 28, 2023 01:18 pm
Which hardness level should be set for the Siemens EQ6plus S700 if a
Brita water filter is also used? The water filter is set to C because we have very hard
water. So filter is set to C, to what degree of hardness should I set the machine?
Posted by: kaffeechris January 28, 2023 03:13 pm
Hello either you can set only filter or only water hardness.
Option would be an undersink descaler faucet.
Sincerely Chris
Posted by: Gast_Nobody January 28, 2023 03:27 pm
Thanks Chris,
but what to do now. Should I then use the water filter to lower the machine now
to water hardness 1 or set a check mark at the softening system?
An undersink softening system is out of the question for us, but thanks for
the suggestion.
Posted by: kaffeechris January 29, 2023 10:24 am
Hello, put the filter in and set hardness level to 2 and get yourself a descaler, amidosulfonic acid based. Regularly decalcify when prompted and remove the filter before decalcifying.
In your case since you have such hard water would only for the MWP provide me a case of non-carbonated water for the water tank.
Sincerely Chris
Posted by: Gast_Nobody January 29, 2023 11:08 am
Hi Chris,
I will try it that way then. Thanks
Bean2cup.org > Water & Lime > Water filter and hardness level