AEG CG 6400 Display black

Hello
need help
my AEG CG 6400 has a dark display.
machine is on, but you can't read anything in the display.


LG
Marianne

Hold flashlight in front of it, then you will see something?

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Hello

if I hold the flashlight in front of it you see very little and it says
use brewing unit.

Now I took out the brewing unit and put it back in again.
Then it heats up and does the rinsing and then the brewing unit stands
insert again.
(But I can only read that then how to cover the machine completely and
as you say read with a flashlight.)
But it doesn't make any coffee.

thank you and
greetings
marianne

Hello

I have now dealt with the display and removed.
Since I looked around in the forum - solder joints checked and see da
Display works and lights up again.
ABER now
is the further error:
machine is switched on, rinses and then comes in the display brewing unit insert.
give it out and then back in and new game starts.

thanks for a help

greeting
Marianne

Install the brewing group and switch it on, normally it will then make its initialization run (up- down).
When the brewing group comes on then the one under microswitch is there, or cannot be started.
This one is mounted on drive below.
Disassembly instructions can be found in the WWW.
What you need in a 15 mm safety hot-port screwdriver for the lower plate.

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Hello and thank you

> but now another problem

because I discovered a leak in the water boiler before, I replaced the seals in the supply lines.
then everything is reinstalled and now appears in DISPLAY "ALARM" and
it doesn't work anymore now.
has cleaned everything clean,

how can I now take the ALARM away again?

thank you, thank you.

greetings
Marianne

The upper microswitch is an opener, is connected and works?

Gehe times everything again through, otherwise reset times simply.

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

hello

thank you for now.

microswitch is okay.


my question now.
how can I reset everything when the machine does nothing except that
alarm is there and no buttons are working.


think and say thank you for now.

greetings
Marianne

Hello, do the resistance measurement.
Must register with Kaffee-Welt to download this link.

http://www.kaffee-welt.net/filebase/index....nsor-10-12-Erg/

MfG Chris

--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.

Hello Chris

Resistance measurement done,okay.
ALARM lights up , Machine like dead.

Help please .

Greß
Marianne.