Hello my Saeco Incanto de luxe does not draw water. Flowmeter I have already cleaned pump exchanged, but it comes again and again the display bleed it comes no water when I open the steam lever. ;-) do I also have to press a button? The water goes up to the hose at the top of the pump. Nothing arrives at the lower hose (the transparent one). In the red pressure hose there is hot water
, newest state ;-( come no further I have removed the boiler think that is to be decalcified now with the manual. Should I blow into the tubes at the boiler the air from go through? do I see the right? or is there where a spear check valves or something? Could I have some information, please?
close
Share this post: