Advanced search

Quick Miracolo Problem

The machine does what it wants.

sascha.!

January 06, 2010 01:49 pm

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 6596

Joined: January 06, 2010

Good morning.
I'm new here-I've come to your forum in search of help.
And although I have a problem with my Quick Miracolo coffee maker.
It's visually and technically very similar to the more modern Quickmill 05000a coffee maker with a few exceptions.

As soon as I switch on the maker, a continuous beep sounds and the malfunction lamp lights up. After about half a minute, the beeping stops and the machine does EVERYTHING at once: Infinite grinding, brewing group moves up and down infinitely.
The water pump doesn't start,heating heats but.

Have you any idea where I can start troubleshooting?

Many thanks already: Sascha

jokel

January 06, 2010 05:17 pm

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

Hello Sascha,
sounds a lot like a problem on the motherboard. However, I have too little idea of QM. The "specialist" is mr.smith, who however is not so often present here anymore. The best thing will be if you wake him up with a PN "".



Greeting Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

mr.smith

January 07, 2010 10:09 am

*

Barista

Group: Mitglieder

Posts: 203

Member No.: 1471

Joined: October 23, 2007

Gäähähhhn...grummmel - good morjen ... - I have just been awakened ph34r.gif

Can't say more about that either - is very probably the patina !
If - then it's an economic total loss - wants to say it's not worth preparing it anymore (if you ever get a circuit board for the guy !??)

For the money of the circuit board (or a little more - from € 140,-) you already get used machines in the bay.

I'm sorry I can't help you anymore.
(real "specialists" could ! rolleyes.gif

>Jürgen



--------------------
Quick th mill

sascha,!

January 09, 2010 12:04 am

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 6646

Joined: January 08, 2010

Good evening.

Sorry to wake you up so rude smile.gif

I hope I found the problem-I just soldered wildly and replaced all components on the board with existing ones from other devices. Maybe I got the right one by accident...At the moment the machine is working again.
Let's see...

As mr.smith said-give away the device for repair doesn't really pay off. If it doesn't work again by chance, this relic will probably find its way to scrap metal...

mr.smith

January 09, 2010 10:23 am

*

Barista

Group: Mitglieder

Posts: 203

Member No.: 1471

Joined: October 23, 2007

I am glad that it went so easy !
Fiddling around myself is always the better (cheaper) way.

Many joy with it further
Jürgen



--------------------
Quick th mill

sascha,!

January 09, 2010 05:48 pm

*

Coffee drinker

Group: Mitglieder

Posts: 2

Member No.: 6646

Joined: January 08, 2010

Thank you mr.smith!

Your offer will come back to me if the machine actually gives up the ghost. What I do not hope because I am totally convinced of his coffee, the technology is almost indestructible - only the electronics...

With kind regards and the wish for a nice (rest) weekend: Sasha