Hello Wolfgang,
It's been a while, but people who have the same problem find their way through googling and back here and there's no answer.
That's why: First of all the Caffeo F53 is quite identical to the Varianza CSB. A similar forum entry can be found here:https://komtra.de/forum/index.php/Thread/10103-Melitta-Caffeo-Varianza-F-57-0-101-Wie-Geh%C3%A4use-%C3%B6open/it
starts with the lid. First pull out the two plastic rivets behind the water container. Then loosen the clips around the lid, the middle front one is a bit difficult. Then everything can be loosened bit by bit with
a 1er Torx screwdriver. Should be a screwdriver as long as possible. Bit is not enough for all screws. Here also a video up to the grinding mechanism of a Thai colleague:
drainage valve lies behind a cover behind the brewing group, which can
also be loosened with Torx screws.
VG Peer
close
Share this post: