DeLonghi ecam 350.15
Posted by: Delonghiecam22110 February 04, 2023 03:49 pm
The machine goes into general alarm as soon as you turn on the switch at the back !.
And so does not start up .
Circuit board and hall sensor already replaced but does not help anything .element is ok .
The machine is still in fine condition and little used .
Anybody any idea where to look now .
Posted by: Schlawi February 04, 2023 04:57 pm
Check whether the overtemperature fuses on the heater are still intact.
It is best to measure the resistance at both ends. One cable is on the circuit board, the other on the rear panel.
Posted by: welcherName February 22, 2023 10:17 pm
Hello,
Problem solved?
When exactly does the error occur? Immediately after switching on?
Where is the brewing unit ? below, removal or above?
Greetings
Bean2cup.org > DeLonghi > DeLonghi ecam 350.15