Reservoir problem Cafe Saeco Talea Black Rong Plu
Posted by: Wissé Wam August 11, 2023 03:19 am
Hello,
For some time, but now more and more often, when I start a coffee, the grinder runs for a while and then the display shows "insert coffee into tank", even though the tank is full.
The cycle stops and the ground coffee is ejected.
It used to happen once in a while, but now it's 3 times out of four.
I've increased the grinding time, cleaned the funnel, but nothing helps.
I think the problem is known, but I can't find a solution.
Please, help!
Thanks for your help,
Posted by: MrLed August 11, 2023 12:38 pm
The fault is known.
The grinding mechanism moves too easily.
Disassemble the grinding mechanism and clean it thoroughly. There is a felt ring under the lower grinding disk, clean it as well and reinsert it upside down. Reassemble everything.
The grinder should now be a little more sluggish and work again.
https://saeco-support-forum.de/threads/talea-ring-mahlt-aber-brueht-nicht.57866/#post-354894
Posted by: Wissé Wam August 28, 2023 05:37 pm
Hello Mr Led and thank you for your reply.
I don't know how to access the mill as you advised...
Bean2cup.org > Saeco > Reservoir problem Cafe Saeco Talea Black Rong Plu