Hello Wolfgang a lot of steam is always good.
The thermal fuses in the steam generator are fuses that switch off in the event of too high a temperature, so it triggers.
If enough steam is generated, I hope in your case also, then the connector could have a hairline crack, as first I would change if not already done the O-rings on the connector and wetted with silicone grease something (at regular intervals).
So now times the horse from the front.
Steam quantity is not equal to steam quantity.
Relatively speaking, a small amount of steam can look like more than it actually is.
If you don't already descale again with descaler on amidosufonic acid, Watch out for this ingredient. Eilfix, Durgol. Or in the bay or Amazon.
So dan first work off the last step and then the other things.
--------------------
Alles ist Wiederverwertbar, sogar diese Buchstaben.
Keine Anfragen oder Hilfe, über E-Mail.
close
Share this post: