Melitta Coffee Variance CSP Auslauf

Hello Forum
,how can you remove the outlet module completely, so you can reach the clogged nozzle from behind. Unfortunately, "piercing" from below does not work, as otherwise the conical plastic inserts
will be
damaged
.

There is another plastic part in the middle of the bottom - possibly only a screw cap to lever out, but I don't want to

risk

that without further a

do. Thank you
very
much

I have the same problem.
And you can not find anything on the net can not be true....

If the spout is clogged with coffee grease, it may be sufficient to spray it thoroughly with "Coffee Clean", a grease solvent from ceragol. Simply spray into the spout, allow to take effect and then rinse.