Advanced search

Miele 6350 flushes too frequently after software update

Clean milk line every 30 minutes

Pommerle

April 20, 2021 06:57 am

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 43414

Joined: April 20, 2021

Hello honored forum members,

I had my Miele automatic coffee machine CM 6350 Black Edition repaired in a Miele specialist workshop. During the repair the latest software update was put on the machine.

Now the machine shows the following behaviour
:When drawing a cappucino or another product with milk, the message appears after approx. 30 minutes: "Please insert milk line into drip tray". After I have done this and confirmed with "OK" the milk line is rinsed hot.

Problem: With my cappucino drinking habits, I have to have the milk line hot rinsed almost every time before I can get the next cappucino. That's annoying.

Another problem is that due to the frequent rinsing the water tank must be constantly refilled and the drip tray must be cleaned along with the grounds container. This is even more annoying.

Miele as well as the repair shop both say that new updates are always necessary and cannot be reversed. Miele further says that frequent rinsing is for hygiene, otherwise germs can build up in the milk system.

Before the update, the request to "clean the milk line" came about after 2 hours. I never got sick due to germs then either. rolleyes.gif

My questions:
Has anyone had the same experience?
Is there a solution to change this without having to give up my cappucino?

I am curious about answers.

Greetings from
Christian (Pommerle)

















BlackSheep

April 24, 2021 06:18 am

*

Experienced

Group: Mitglieder

Posts: 846

Member No.: 2529

Joined: July 26, 2008

It is also usually the case that software updates on such machines
can
no longer be undone.
Therefore, you will
have to
live with the "new feature".
Intervention by the user is also not possible.

There are only 2 possibilities:
1. Miele develops a new update with a longer cycle time and releases it2
. You find a used working main electronics, which does not have the software update yet and build this in your machinePossibility

1 will probably not come and 2 only with a lot of luck and a lot of effort

...



GreetingsBS












--------------------
Ich schaue hier nur noch ganz selten vorbei.
In verschiedenen anderen Foren bin ich mit
dem gleichen Nickname zu finden, falls mal
jemand Hilfe benötigt kann ich vielleicht dort
helfen.

Gast_Pommerle

May 09, 2021 07:40 am

Unregistered

Hello back,

Thank you very much for the answer.

Too bad, but that's exactly what I feared.

And even if I buy now ne new machine I fear, there the same problem will be.

Thanks a lot

Greetings from
Christian (Pommerle)