Quick Mill 05000A from the bay

I already wrote something about this here:

/forums/...15&#entry47589


The whole thing behaves like buying a car with an undocumented past.
The counter has only 4 digits, and 10,000 covers including rinsing processes are quickly reached. So the display is worthless if you couldn't read and record it yourself from the first purchase.

Just as the condition of the rubbers on the pedals, the seats, the floor mats and the gearshift lever are revealing in the case of the car, the optical impression, the background noise and the condition of the grinding discs are revealing in the case of the coffee machine.

General the QM has very few wearing parts, because e.g. the heater does not have silicone seals anywhere, the brewing group drive has a brushless alternating current motor and also the query contacts at the grinding mechanism and brewing group are contactless reed switches. A total loss therefore occurs practically only if the machine falls from the cabinet or something similar.

--------------------
Quick Mill 05000 "Unique Edition", WMF Ecco

@W1cht3lm@nn:
Thank you once for the answer. Actually, your VA's background has aroused my curiosity about this. From a purely emotional point of view I can confirm the statement regarding durability even if I lack the practical experience with it. What I want to say is that the execution of the individual parts alone makes a very valuable impression. Unfortunately I haven't figured out yet how to post pictures here (hope that will be with the continuation of my stay here) otherwise I would have shown them already.
The seller describes the machine as follows: "All wearing parts (seals, sieves, hoses and filters) have been replaced.
The machine is completely cleaned inside and out and can therefore be regarded as new."
It cannot provide any information about the covers. As price 299,--€ was called.
Ach yes as type was indicated Quickmill Aquaviva 05000.

Uploading pictures is best done via services like http://www.picr.de

The corresponding function of the forum has not worked for a long time.

--------------------
Quick Mill 05000 "Unique Edition", WMF Ecco

Hello, I did everything fine with a Quick Mill 05000, also the lighting of water and pomace containers works perfectly, a good advice from W1cht3lm@nn. I still want to change the drip tray to get higher cups under it and coffee spout in stainless steel is also somewhere, but I do not find. For the links would be very grateful.
Greß
http://www.pic-upload.de/view-11698238/DSC04656.jpg.html

I don't have any direct links to webshops parat.
However, you should be able to get these parts if you send an email to the five dealers mentioned above.

--------------------
Quick Mill 05000 "Unique Edition", WMF Ecco

Hello espresso drinker, now the gearbox in the machine has gotten damaged, a plastic wheel broke, unfortunately such a wheel could not be found individually and bought the whole gearbox. Now it comes, I didn't take a picture of the back side and now I have no idea how the two wheels stand to each other in the ground position. Maybe someone has a picture for me. Thanks in advance.