Hello all,
Recently I posted about issues following replacement of my drive (including drain valve) and brewing unit. I am pleased to inform that that has been resolved.
Unfortunately after only 2 cups of coffee the machine's original fault has returned. When making any coffee the machine grinds the coffee, empties into the brewing unit, the drive starts to turn the brewing unit, sounds like it is struggling, and without any system error etc then switches power off with a beep.
I have replaced the brewing unit, drive and drain valve, so all mechanical failures relating have been replaced, and as far as I can see the pump is operating normally. Has anyone experienced the same situation and resolved? I have spare microswitches if it is one of those at fault but I can see no further moving parts to replace...
close
Share this post: