QUOTE (jokel @ Thursday, 02. April, 2015)April 2015, 09:38 am) |
What do you mean by much? There's got to be a real jet coming out, that's after the pump.
Gruß Stefan |
Hello Stefan,
I just took off the hoses at the pump for the test and had the pump pump pumped into a bowl.
This is where I arrived as far as I can judge the sufficient water.
It was running almost continuously out of the upper valve.
In any case much more than if the pump was pumping through the whole machine and the water should run out normally at the front.
What about the hoses 6, 7 and 8. There is actually no water in them.
Neither when making coffee, nor during the rinsing process.
Eben I tried to make a coffee again after the test run of the pump and there was also some coffee out front. However much too little.
After that I let the rinse run and there it only dripped.
Do you still have an idea?
Gruß Robert
close
Share this post: