Caferomantica 620

Hello, this is my first contribution here and already a problem.
I got the Caferomantica as a present years ago. Since I already had a vending machine, I put the device org. packed in the corner.
Now just today my old vending machine gave up the ghost.
So the Caferomantica unpacked and wanted to put it into operation. But now she does not recognize the filled water tank. So it can not be ventilated and then put into operation. The tank's in the right place, and the valve opens too. Does anyone have any advice for me??
Greetings
Holger

I only know the 610, but it should be completely identical. The tank has no float, so the machine only recognizes a full tank via the flowmeter, whose impeller rotates when the pump draws water.
What doesn't work when venting? The pump should start. Is she rattling out loud? Due to the long service life, the pump could be completely dry and may need a jump start if it does not build up pressure on its own...

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Well, to this day it was still originally packed, so it was put into operation for the first time.

I already understood that Does the pump start? Is she drawing water? Why do you think you can't vent them? If you don't answer my questions, I can't help you

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Sorry,
I must have misunderstood you. No, pump won't start. After switching on, you should press the standby button and then the S/Steam button. But it's dark and nothing happens. Empty water tank lights up in the display, 2 beans and hot water/steam flashes. That's it.
Greetings
Holger

What happens if you just flip the steam switch without pressing any button?

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

The pump works a while and then nothing, no water or steam

I thought to myself, simply stood dry First measure: lift the full water tank several times while the pump is running and put it back on again vigorously, this light pump is sometimes sufficient as a starting aid for the pump. If that doesn't help: Open the machine and fill the pump manually, but this is a rather tricky task, because the pump is connected to mains voltage...

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Perfect, Tipp1 helped.
Thank you, Whitsun is saved.

Nice to meet you

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Also have this message, everything already filled manually, does not help.
Can it be that the flowmeter def.is?
How is measured there?