Thanks helped.
I didn't want to send the plane across the Republic because of a suspected blockage.
That's why I took the plunge. All is well in hand.
1. There is a Phillips screw from below in the cup lighting. After removing this, the coffee spout can be pulled out
to the front.
2. To disassemble, remove the 4 screws (2 above, 1 below, 1 in the middle), push the grid in the middle to the side and pull off
the front panel.
3. remove chrome-plastic parts upwards and downwards. Metal bars out the top.
However, the fault was not a blockage but a crack in the bend of the drain hose.
close
Share this post: