Caffeo Lattea

Hello everyone,

I have a problem with our Melitta Caffeo Lattea. Unfortunately the brewing unit cannot be used after removal and cleaning . As it looks, the PTO shaft is minimally twisted and therefore no longer fits into the recesses of the brewing unit in the extraction position (however, I don't know how that is because my wife cleaned the machine). Does anyone have an idea how to twist the PTO shaft?

For your help I would be incredibly grateful - I'm really missing a good coffee again.

Hello
Start the machine and press one and two cup cover at the same time
Then it had to move back to the correct position
Greeting Andreas

Thank you
had the same problem with our Caffeo Solo, could be fixed with this key combination :-)

Thanks! didn't work with us because we didn't have two cup keys, but it worked with cup combination key + steam key.

Hello, now I have the problem too, but the station wagon doesn't work for me. It continues to blink brightly and the pin is adjusted

Hello , had today the same problem with cleaning ...Cafe/Solo ....key combination MyCafe and steam nozzle and when the dispenser moves back into position , with light pressure against the brewing unit helped ... since then it works again.

Oh super tip, had the same problem and was already quite desperate...now my Melitta solo works again, thank you

You guys are awesome, thank you very much!അ

Hello, thanks for the tip.
I made the mistake of pressing the power button and the cup buttons at the same time.
You have to release the ON/OFF button and then it goes ;-)
Thank you!!!!

Thanks a lot, now my Melitta works again!

Hello.
Same problem with faulty end position of the driving journal. I followed the thread and tried everything described here. The two micro-switches on the back exchanged; factory reset - all without success. The pin still turns over the end position - I lost a driver of the drainage valve - until the overload circuit responds and a nice running light appears on the front side of the machine.
Does anyone still have an idea or how can I test by hand which functions the individual microswitches have?

Gruß
Beate

Hello, Servise has the following " secret" key combination betrayed.

switch off device
-1^2 cup fume cupboard + on/off button 3s hold down (cleaning program active, |o| and power light blink alternately)
- switch off device
- steam button + bean button + on/off button 3s hold down (shaft really turns to home position)

has worked with me.
Anosnten the lady also said, don't spend long on the doctorate, just call!
Greeting Rene

oh, for Melitta in Germany
0571 861900

thank you!