Siemens TK76K572

Hello to all frahling lovers,

first time great that there is such an exchange area. The instruction manual fails in some places rigorously.

We came back yesterday from a 14-day vacation. Since then the coffee doesn't run liquid out of the coffee spout.
It doesn't look nice first, second it makes a huge mess and I have the feeling that part of the black gold gets stuck in the machine and doesn't end up in my stomach.

I've already decalcified the machine a few times, cleaned it and cleaned the brewing unit.


Thank you for your answers

A nice evening

The way the problem is described, it looks like a clogged spout. The coffee does not run through the two outlet holes as intended, but passes them. Then it begins to splash and the coffee does not run in a jet but bubbles past the holes tw. into the cup.

Does it also splash when you decalcify? Actually, it is enough to carefully push the spout back on with a toothpick. You'll also find some stuff in the forum if you go to "clogged" [2] search.

Decalcifying doesn't help much in this case because the holes are blocked. The descaler reaches the upper end of the hole, but cannot flow through it to widen the hole. And so aggressive that it clears the hole from above the descaler is not etched either (Vgl kettle decalcify). Try using a toothpick (as in the linked articles) and then descaling.

--------------------
Stolzer Besitzer einer Siemens EQ5

Many thanks for the quick answer.

I have now tried to clean the holes with the toothpick. After subsequent decalcification it was slightly better, everyone piled up the coffee in the outlet pipes after a short time and it dripped next to it again.

The links recommended by you speak of the removal of the outlet distributor. Is this also possible with my device.
I didn't find a way to lever something out"

greeting

Hello doubleespresso,

have you found a way to extend the outlet?

best thanks to

xmix

Hi,

is new here in the forum, now have the same problem, has anyone ever removed the discontinued distribution list? have already tried it, but do not want to abort anything or so. Hope it can help me someone < br> < br> many thanks < br> < br> salute Nino

Hello Nino,

foam times with komtra.de or coffeemakers.de under the service manuals after.
That might help you further.

--------------------
Gruß Rudi

Hello Rudi,

thank you but for my tk 76 k 752 nothing found

Hello Nino,

the Siemens TK76K572 KVA is the built-in model of the Siemens EQ7 series.
Therefore I assume that the instructions are to be used analogously.
Of course I can be wrong, I don't know the model personally.

--------------------
Gruß Rudi

Thank you, I'm afraid there's nothing, just for another machine....

Good morning...

Have the same problem. I once attached a photo of the outlet without milk frother. Maybe it looks familiar to a Siemens/Bosch user. machine is one year old, so the problem should be serial )

Thanks for tips

Greetings Goekel

Moin,

has now left me no peace. Thanks to the site gunnar.ausapolda.de I dared it. The two tabs must be pressed inwards. One side at a time. Danger of breaking off. Remove the two Torx screws first. Then remove the spout, lamp away and hose off. I couldn't get the small spout open. But properly flushed out and blown out. It's all right now. Could have made the nice developers more easy to clean (

Grüße Goekel

That's exactly how it goes. Thank you;

Hi people who screw with me it looks similar to the picture. Request for help