Electrical diagram Nivona Cafe Romantica 610/620

Good morning,

I have a little problem with my Nivona Cafe Romantca 610/620.

I gave the machine to someone who should have a look at it and got it back with a mistake!
I have the machine now at a specialist in our town and he has found out that the wiring on the board is probably wrong! He himself has no wiring diagram for the device though.
The Nivona Service doesn't want to help me with a circuit diagram, because our coffee factory is not a Nivona Service partner here.

In other words, the machine would go after a new wiring, but nobody knows how to plug it in. Can anyone help me here in the forum by chance?
Otherwise I have to bring my running machine.

Many thanks

Greeting Jan

The device is closely related to the Siemens TK54... Maybe you'll find a plan there...

shouldn't be so hard to find out what the device has, what kind of error is it exactly?

Hello,

>The brewing group is not supplied with power!
It's just the problem that the cables on the circuit board were wrongly plugged in.

Please have a look at the article of 04.07.2010 : Surpresso TK54001 Water empty after rinsing.

There is also a nice picture with a connected electrics.. this should be the same as yours..

Or enter this webpage into your browser (without URL=)

URL=/forums/index.php?showtopic=8777&hl=surpresso+tk54

I found something here again:

/forums/...showtopic=14953

Are you sure they are the same there?

Were of course the hit!

Below right at the electrics are 3 slots, where the upper one of the 3 is for the microswitch... I'm not sure now but I think the drive motor comes underneath..

See spare part electrics for Nivona 610 at the BND-Kaffeestudio (Juraprofi)

I can't follow your link, the Siemens Surpresso 54 should be the same as the Nivona 610... The inner life, in any case.

So again like this:

URL=/forums/index.php?showtopic=14953

Yes, I've seen...that's the same electrics..

On the other side of the photo (not visible) the drive motor is connected...it's either the second slot on the right from below or it sits in the row up-right quite far down but I can't see enough on the pictures.

The plugs in the upper row are smaller as well...probably display and keyboard

Mororor cable should be one red and one green...and a bit thicker... that's why the lower right row of plugs

see spare part electric for Nivona 610 at the BND coffee studio (Juraprofi)

So, all cables are plugged in correctly! but the heater still doesn't get power.
Heating itself was measured by the technician and power also arrives on the circuit board. Cable break is not present after his examinations. seems probably, that the Plantine has one away can be probably in addition, a switch he says.

Will probably times our functioning machine bring so that he can exchange the boards times.