Advanced search

back

New Topic

Go to first unread post

ESAM 6600 - no water vapour

Gast_ralle

January 04, 2016 12:12 pm

Unregistered

Hello,

my ESAM 6600 is spinning. If you go on water, it just crackles, but it doesn't happen anymore.
The cup warmer gets warm.

Coffee brewing also works great and without problems.

>many thanks for your help.

gruss ralle

looser

January 04, 2016 01:14 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Do the two solenoid valves work?



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

Guest

January 04, 2016 03:45 pm

Unregistered

hmm.... good question. How do I test the best?

He makes a few noises but ?

inmado

January 04, 2016 04:32 pm

*

Coffee lover

Group: Mitglieder

Posts: 73

Member No.: 9142

Joined: August 04, 2010

You can go to test mode:

Test mode ESAM 6600 (PrimaDonna)

Pull power plug
Press "2 small cups" and "2 large buttons" simultaneously
Plug power plug in
The display will show "Load test mode"

looser

January 04, 2016 04:33 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Google to test mode 6600.



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

Guest

January 04, 2016 05:28 pm

Unregistered

QUOTE (inmado @ Montag, 04.Januar 2016, 16:32 hrs)
You can go to test mode:

Test mode ESAM 6600 (PrimaDonna)

    Unplug power cord
    Buttons "2 small cups" and "2 large buttons" simultaneously
    Insert mains plug
    The display shows "Load test mode"
    Release buttons

Move brewing group: with the buttons "1 large cup" and "2 large cups"
Thermoblock: Press "P"
Steam heating on: button "Rinse"
Pump on: Press "Water"
Grinder on: button "Aroma selection/Coffee powder"
Solenoid valves EV1+EV2 on: button "Cappuccino"
Solenoid valves single: "1 small cup" --> EV1 as well as "2 small cups" --> EV2

Aso according to the test everything seems to go.
EV1 EV2 on.
Vabrosizer ON etc.




looser

January 04, 2016 10:09 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Is this on the display or is the action also executed? Heaters get hot, valves crack.....



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

inmado

January 05, 2016 10:40 am

*

Coffee lover

Group: Mitglieder

Posts: 73

Member No.: 9142

Joined: August 04, 2010

I once did it like this:

WARNING: High voltage in the device! - PREViously pull the plug when working on the open device.

  • open machine (unscrew fairings)
  • trace the path from steam generator to steam outlet
  • loosen the hose in front of a valve and lead the loose end of the hose into a bottle
    • li>then generate steam in test mode and observe whether steam comes out of the loose end of the hose
If "before" the valve is still observed steam, "after" the valve is no longer, it is probably defective.

WARNING: High voltage in the unit! - DO NOT TIGHT THE PREVIOUS POWER CONNECTOR when working on the unit.

ralle_001

January 05, 2016 11:13 am

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 28081

Joined: January 04, 2016

QUOTE (looser @ Monday, 04. January 2016, 21:09 hrs)January 2016, 21:09 hrs)
Is this on the display or is the action performed? Heaters get hot, valves crack.....

Have looked directly at it again.

EV1 doesn't click, because pipts only.

you can assume, that the defect is?

must do: Steam heating on: button "Rinse" also what to hear?
it only indicates.

looser

January 05, 2016 04:51 pm

*

Expert

Group: Mitglieder

Posts: 2322

Member No.: 5600

Joined: October 28, 2009

Possibly only the coil is defective. Used you get the cheap.
The brewing group must be at the top so that water is pumped in test mode.



--------------------
Nach vielen verschiedenen KVA habe ich jetzt meinen Seelenfrieden. WMF 800 :-)

www.DeMichaelLonghi.de

ralle_001

January 05, 2016 05:00 pm

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 28081

Joined: January 04, 2016

Ah, so let's take a look at the coil.

Is there a guide of photos where the EV1 is located?

Thank you already.

jokel

January 05, 2016 05:11 pm

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

EV1 sits at the back of the steam heater.

Greeting Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

ralle_001

January 06, 2016 09:26 am

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 28081

Joined: January 04, 2016

QUOTE (jokel @ Tuesday, 05. January 2016, 16:11 hrs)January 2016, 16:11)
EV1 sits at the back of the steam heater.

Greeting Stefan

Ah habs found, I think.

Is a 3-way valve or am I there wrong?

>I'll order one sometime.

jokel

January 06, 2016 04:16 pm

*

Expert

Group: Mitglieder

Posts: 2594

Member No.: 1411

Joined: September 26, 2007

Yeah, it's a three-way valve. Read the description in the shops carefully, because the new ones are with plastic body.

Greeting Stefan



--------------------
Esam 6600 PrimaDonna
Ich helfe gerne und freue mich über jede Rückmeldung, was leider nicht immer vorkommt. Fragen werden NUR im Forum beantwortet.

Mal bist du Hund, mal bist du Baum.

ralle_001   

January 09, 2016 01:26 pm

*

Coffee drinker

Group: Mitglieder

Posts: 7

Member No.: 28081

Joined: January 04, 2016



VIALUES THANK YOU to everyone who helped me with the solution !!!!&#br>
Ordered the valve and changed it earlier.


>Machine works again !!!&#br>

>beautiful WE

>greuss ralle

 Seite 12

back

New Topic

Go to first unread post

Print this topic
Next Oldest Next Newest