Saeco Odea Go

Hello,

Today while cleaning the Odea Go, after the last rinse, suddenly the red exclamation mark went on. Although there was still enough water in the tank. Since then it doesn't go away anymore Machine doesn't work anymore.
Fill water tank, turn machine off, press steam button for 6 sec... nothing helps.
What can it be?

Lg

Good morning
, this problem
also occurred with my machine
this
morning.

I had replenished the water and emptied

and cleaned the

coffee container

. Then the red exclamation mark appeared. I read your contribution on
the
Internet.

I took out the remaining container again and wiped

out the interior of the device with

a cloth

.

Then I let

off hot water for a

little

longer

via the spray nozzle

.

Suddenly the machine jumped back

to its normal function.

Meanwhile I have my hot coffee

standing in front of me.
I wish you much
success !Herbert

Worked!
Thanks for the tip!

I know I'm stupid! I love this *white coffee machine. Some time ago it didn't make coffee again. Was picked up by the friendly workshop in Mölln. Was there for a week... and... worked perfectly. Back at home again. Until the day before yesterday. Red exclamation mark. To cut a long story short, it must have something to do with the unfortunately "invisible sensor" in the area on the right-hand side of the machine where the pulp container is located. Because sometimes when I insert the corresponding containers and close the door "in a certain mysterious way", the saeco giro plus makes delicious coffee again from my home-roasted Ethiopian beans. Unfortunately, the steam function doesn't work for me either, so I couldn't try the above procedure. The machine will probably have to go back to Mölln. Happy New Year.

G. Stapelfeldt

The magnet in the pomace container is usually rusted.
Either get a new container or, as I always do, insert a new magnet.