Repair Ena 5

Moin Moin Zusammen!

short description and question about my 10 years old Ena 5.

Yesterday I disassembled and cleaned the brewing unit for the first time, but only cleaned and greased the sealing rings, but didn't replace them!

After I had proudly reinstalled everything correctly like Oskar and wanted to start the first run, my problem remained the same: The machine draws water, but it still flows into the collecting tray...and not from the nozzles into the cup!

After cleaning she purrs like a kitten, but problem is not solved!

Now to the question:

- Replace O-rings?

or what else could be wrong?

Thank you for useful answers!

Good evening,

After 10 years it is normal to change the seals. Order a seal kit for the pistons and drainage valve. When you have everything back together again, the machine should make coffee again.

Greuss HWS

Hello,

not by ordering the normal sealing kit, but also
a cap for the valve tappet of the drainage valve.
According to your description, this could also cause the problem
e.g. at Komtra under article number 10652
(article search at Komtra - links go here mostly
not...):

https://komtra.de/jura-ersatzteile/jura-ers...ueheinheit.html

Greß
BS

--------------------
Ich schaue hier nur noch ganz selten vorbei.
In verschiedenen anderen Foren bin ich mit
dem gleichen Nickname zu finden, falls mal
jemand Hilfe benötigt kann ich vielleicht dort
helfen.