KRUPS EA81* EA8105 EA810507 Reset

Servus and the pre-authors Thank you.

I have an EA 8161 machine with display, see here:

My Webpage

How can I reset this machine? Unfortunately, nothing can be found.
If I






follow






the steps:

-Unplug the machine-Remove the water

tank-Remove



the


coffee cake
container-Remove the cleaning

slide-Hold down the "prog"
button-Plug the machine back






in,








I get to the menu, but I can't find anything there....

Can someone hero?

Thank you LG

Does anyone have any advice on how to reset the device?

To all involved in RESET procedure... You MUST let machine finish it's initialization cycle... that is to say - twice is water going through steam panarello nozzle and You have to prepare large cup under it to let machine finish. Only after that You will have working machine and enjoy in espresso...

QUOTE (Guest_Sven @ Monday, 15 November 2021, 14:43)

After step 11 it does not work anymore. Plug it back in and the coffee machine stays off

I have the same problem - is there a Lsg.approach here?

On the EA81* coffee maker there is no flow control, no strong coffee button, no weak coffee button...
This procedure is not viable for this machine

Hello
, like wilfried, I have an AE81* and for me neither the procedure you describe gives anything.
Small difference with the other cases mentioned in this post, my machine stopped working after a cleaning cycle.
Since this cleaning, it turns on and heats up (the blue button flashes and then becomes fixed) but the calc button flashes as soon as I turn it on and if I press a coffee / strong coffee button (cup + one high line / cup + 3 lines), the water tank button starts to flash too, without anything else happening...
I tried your method, I disassembled the machine to disconnect and reconnect the card, nothing happens... It is well and truly blocked:-/Thanks

for your lights!

Hello to all,

I have a krups coffee machine model ea815070/70J-2818 with a digital displayIt
is stuck in the cleaning cycle.
I have disassembled and cleaned the flow meter.
I have tried to do a reset by pressing prog and plugging in again, I get a menu but the machine shows all the lights.
What should I do next?
Or do you have an idea of the problem?
I thank you in advance

QUOTE (Gast_HaWe @ November 28, 2020 05:22 pm)

KRUPS EA81* Reset With or without cleaning slider. Pomace container and water container LED flash. Attempting to change the grinder setting, grinder grinding time, grinding quantity, coffee powder quantity according to a procedure described in the forums will usually render the machine unusable. Pomace container and water container LED flash after restarting, no more button input possible, machine does not heat. In a forum an unknown forum user has described a possible RESET for all concerned. I emphasize explicitly that I am not the tinkerer of this procedure, the praise is due to an unknown person. I only transfer the procedure into a readable form and add some steps. I have tried it on a machine WITHOUT cleaning slides. It works !1. turn off the power (remove the plug)2. Remove the water tank, marc container, cleaning slide (if present)3 . set the flow control knob to 20ml4 . press and hold the "strong coffee" button on the far right and plug in the plug5 . all LEDs light up, water tank full, marc container, cleaning slide (if present) reset 6. adjust the flow control knob until all LEDs are off (approximately in the middle position) 7. place the container under the coffee spout and steam nozzle, now press the "weak coffee" button8 . Water is pumped through the coffee spout and steam nozzle, the brewing piston moves to the upper edge of the brewing chamber. The process is repeated twice. Then all red LEDs are off9 . Press the "weak coffee" button again10 . The machine lowers the brewing piston twice, the last time the brewing piston remains in its lowest position</br></br>. When "all LEDs flash" 11. pull the mains plug and wait for at least 5 seconds12 . Insert the mains plug, the brewing piston moves to its initial position. The machine works again. </br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br>

For all users with display machines like EA8150, etc

Step by step for the calibration of the grinder:

- Unplug the coffee maker from the electrical network.
- Remove the water container, grounds container, and tray above the grounds container .
- Press the arrow button while you plug the coffee maker back into the network.
- Press the START button once and brackets [ ] will appear on the right side.
- Press the START button once and 3 zeros will appear inside the brackets [000] on the left side.
- Place both the water reservoir and the tray on top of the grounds container and grounds container.
- Now press the START button.

P2 appears.

- Press the steam button once to start the diagnostic.
- The water begins to flow out of the steam nozzle.
- Press the steam button 1 time.
- The piston goes down, but not all the way (twice).
- The piston goes all the way down, the water flows through the piston, and the disc is ejected.

P4 appears.

Disconnect the coffee maker from the electrical network.
Reconnect to the electrical network, turn on the coffee maker and it will have been calibrated.

Hello
,I have a KRUPS EA81* from 09/2018When
I turn on the machine the blue power light comes on steady right away.(without blinking at all).If we serve ourselves a coffee it is lukewarm and bland.The various internal soldering and contacts seem good.
I have reset the machine several times with success and set the T° of the machine to 4.
The coffee served is hot and of better quality but the blue light always lights up fixed at the start up !!!
The next morning it is again lukewarm and insipid.and the residual cake is very thin and liquid

.


After a new reset and adjustment of the water temperature, it's back on until the next day.
The machine loses its memory !!!!!! Do
you
have
a solution?

dodo6250@hotmail.fr

good morning I have the boiler goes up in temperature the two white wires that are stuck on the boiler one and remove it can be repaired please thank you cordially

QUOTE (Gast_HaWe @ Sunday, 29. November 2020, 8:24 PM)

Important addition: After unplugging the appliance from the power supply and plugging it back in, it is imperative to place</br>a 12th large cup under the coffee spout and under the steam nozzle. 13. fill the water tank14 . Press the "strong coffee" button, a program is running to refill the system. Only then will it work again as usual. </br></br></br></br></br></br>

A huge, huge THANK YOU!!!
My Krups coffee maker has reset and everything is working properly again.

A thousand thanks!!!

changing the milling setting does not change or affect anything. The program is designed to grind for a certain time. Only the "time" question remains if the coffee is clear like tea.
The grinding time is resolved by a reset
The fineness of the grind can be modified, but this must be done intelligently. Don't say that this makes the machine faulty, it's absolutely not true.
There is no sensor for the size of the ground coffee. Even in the "fine grain" position, I had mar of 0.5mm diameter (grainy to the touch). So I disassembled the covers, the mill, I modified the angle of the mill head (it is already listed by a colored circle to indicate the factory position). You have to lift the head lock and give it a rotation of about 20° in the direction of grinding more and more fine. In order not to make a mistake, you must reposition the control arm in the grain tank, and simulate a rotation to the left of the adjustment knob and see in which direction the mill head turns. Then you lift the anti-rotation lock, and you shift your head in the direction of fine grinding. Personally, I reassembled everything, and everything worked fine for about two years, until I got that pesky alarm of all the red lights flashing and the mill always locking in the down position. I started by changing the front panel electronic board, this is not it. I'm going to change the flow meter and the pump and then I'll come back to post the progress of the repairs until I find out what's making the mill block at the bottom.
I'm going to proceed in the following order:
- replacement of the flow meter 3€50
- replacement of the pump 34€ delivered
- replacement of the electronic board (the one on the side)
- and replacement of the boiler block if it's still not working
Yes some will quickly say, replace your coffee machine<_< it will cost you less.
Maybe, but ... I don't stall in front of a head gasket that farts, a clogged injector to be replaced, a cardan head to be replaced, a problem with the lithium battery management card HS, a problem with the management of the cooling pump on solar circuit, etc etc etc.
I will go to the end, because I like to understand what's wrong when many people are in the same case as me.

QUOTE (jean pierre @ mardi, 29. mars 2022, 18h36)

QUOTE (Gast_HaWe @ samedi, 28. novembre 2020, 17h22) KRUPS EA81* Reset Avec ou sans curseur de nettoyage. Les LED des conteneurs de marc et d'eau clignotent. Tenter de modifier le réglage du moulin, le temps de mouture, la quantité de mouture, la quantité de café en poudre selon une procédure décrite dans les forums rendra généralement la machine inutilisable. La LED du récipient à marc et du récipient à eau clignote après le redémarrage, plus de saisie de bouton possible, la machine ne chauffe pas. Dans un forum, un utilisateur inconnu a décrit un RESET possible pour toutes les personnes concernées. Je souligne explicitement que je ne suis pas le bricoleur de cette procédure, l'éloge est dû à un inconnu. Je ne fais que transférer la procédure dans une forme lisible et ajouter quelques étapes. Je l'ai essayé sur une machine SANS nettoyer les diapositives. Cela fonctionne !1. coupez le courant (retirez la prise)2</br></br>. Retirez le réservoir d'eau, le récipient à marc, la glissière de nettoyage (le cas échéant)3. réglez le bouton de réglage du débit sur 20 ml4</br>. appuyez sur le bouton "café fort" situé à l'extrême droite et maintenez-le enfon</br></br>cé, puis</br></br></br></br></br>branchez la fiche5. toutes les diodes s'allument, le réservoir d'eau est plein, le récipient à marc, la glissière de nettoyage (le cas échéant) sont</br>réinitialisés 6. réglez le bouton de réglage du débit jusqu'à ce que toutes les diodes soient éteintes (à peu près en position centrale) 7. placez le récipient sous l'écoulement de café et la buse à vapeur, puis appuyez sur le bouton "café faible"8</br></br></br></br></br></br></br></br></br></br></br></br></br> . L'eau est pompée par le bec à café et la buse à vapeur, le piston d'infusion se déplace vers le bord supérieur de la chambre d'infusion. Le processus est répété deux fois. Ensuite, tous les voyants rouges sont éteints9 . Appuyez à nouveau sur le bouton "café faible"10</br>. La machine abaisse le piston d'infusion deux fois, la dernière fois le piston d'infusion reste dans sa position la plus basse</br></br>. Lorsque "toutes les LED clignotent" 11. débranchez la fiche secteur et attendez au moins 5 secondes12 . Insérez la fiche secteur, le piston de brassage se déplace vers sa position initiale. La machine fonctionne à nouveau. </br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br></br> bonjour je tenais a remercier la personne qui a posté le process de reinitialisation de la ae81 pour moi cela a très bien fonctionné, la machine refonctionne très correctement mon problème de temporisation du broyeur a été réglé par la reprogrammation grand merci à lui jp

Voilà, j'ai fini par trouver comment réparer cette fameuse panne de toutes les leds qui clignotent et le piston bloqué en partie basse (j'ai reposté cette réponse sur un sujet à peu prés identique mais peu importe, l'important c'est que le message passe).

Les problèmes :
1 /café trop léger, comme du thé >> mettre en oeuvre la procédure de RESET USINE (voir ci dessous)
il faut faire un "reset USINE" pour vos KRUPS EA8X. Le temps de mouture s'est déréglé parce que vous ne laissez pas un cycle se finir, vous l'arrêtez précipitamment alors qu'elle n'a pas encore fait son rinçage final, etc etc etc. Donc ça finit par partir en vrille comme on dit.
Pour ce fameux "RESET USINE" :
- débrancher la cafetière krups EA 81
- retirer bac à eau, mar, récup eau nettoyage
- mettre le bouton de réglage de la quantité d'eau au milieu.
- appuyer et laisser le doigt appuyé dessus le bouton café fort (avec trois traits) et ne le retirez pas jusqu'à ce que je vous le dise
- brancher la machine sur le 220 V
- toutes les leds s'allument, remettre de l'eau dans le bac et remettez le à sa place, remettez le bac à mar, et la cuve de récupération d'eau de nettoyage.
- descendre le bouton central qui était au milieu des graduation, doucement vers le zéro. Lorsque toutes les leds s'éteignent, ne plus bouger ce bouton.
- vous pouvez lâcher le bouton "café fort" maintenant.
- mettez un bol REMPLI D'EAU sous les buses, et faites entrer dedans la buse vapeur également (moi je mets une tasse haute et grande). Tout doit baigner dans l'eau (bec + buse vapeur).
- appuyer sur le le bouton "café faible" qui n'a qu'un seul trait dessus
- il se passe comme une aspiration dans le bol (ça fait deux fois un cycle de rinçage).
Tous les voyants sont éteints.
- appuyer à nouveau sur 1 café petite dose (le piston va faire deux montées descentes), et vous allez trouver le piston en partie basse
- toutes les leds se mettent à clignoter à nouveau, alors à ce moment là vous débranchez la cafetière 15 secondes et vous la rebranchez.
Vous l'allumez, vous programmez un café fort, et vous allez avoir un café digne de ce nom.

2/ TOUTES LES ALARMES SONT ALLUMÉES ET LE PISTON EST BLOQUE EN PARTIE BASSE.
Commander la façade avec la carte électronique (34€ chez sos-depannage), remplacer délicatement celle-ci sans casser les ergots de blocage (je préconise la dépose des capots supérieurs et bac à grains). Couper le petit ergot de verrouillage de la carte de puissance qui est sur le coté car vous n'arriverez pas à connecter la fiche de la nouvelle carte électronique (c'est mal foutu ceci).

Remontez la façade

LANCER LA PROCÉDURE DE RESET CI DESSUS.

Bons cafés:D:D:D:D:D

QUOTE (nrom38846 @ Sunday, 09 October 2022, 21:42)

QUOTE (guest_HaWe @ November 28, 2020 05:22 pm) KRUPS EA81* Reset with or without cleaning slide. Trester container and water container LED flashing. Attempting to change grinder setting, grind time, grind quantity, coffee powder quantity following a procedure described in the forums usually renders the machine unusable. Trester container and water container LED flashing after restart, no button input possible anymore, machine does not heat. In a forum, an unknown forum user has described a possible RESET for all those affected. I emphasize explicitly that I am not the tinkerer of this procedure, the credit goes to an unknown. I merely transcribed the procedure into a readable form and added a few steps. I tried it on a machine WITHOUT a cleaning carriage. It works !1. turn off the power</br></br> (unplug it)2. water tank, pulp container, cleaning slide (if any)3 . set the flow control to 20ml4 . press and hold the "strong coffee" button on the far right and plug it in5 . all LEDs are on, water tank full, grounds container, cleaning slider (if present) reset 6. Adjust the flow regulator until all LEDs are off (about the middle position) 7. Place the container under the coffee spout and steam nozzle, now press the "weak coffee" button8 . Water is pumped through the coffee spout and the steam nozzle, the brewing piston moves to the upper edge of the brewing chamber. The process is repeated twice. After that, all red LEDs are off9 . Press the "weak coffee" button again10 . The machine lowers the brewing piston twice, the last time the brewing piston remains in the lowest position</br></br>. When "all LEDs are flashing" 11. Unplug the machine and wait at least 5 seconds12 . Plug in the power plug, the brewing piston will move to its initial position. The machine will work again. </br></br></br></br></br></br></br></br></br>.</br></br></br></br></br></br></br></br></br>. For all users with display machines such as EA8150, etc. Step by step for grinder calibration: - Unplug the coffee maker from the mains. - Remove the water container, coffee grounds container and the tray above the coffee grounds container. - Press the arrow button while reconnecting the coffee maker to the mains. - Press the START button once and the brackets [ ] will appear on the right side. - Press the START button once and 3 zeros will appear inside the brackets [000] on the left side. - Place the water tank and tray on top of the coffee grounds container and the coffee grounds tray. - Now press the START button. P2 will appear. - Press the steam button once to start diagnostics. - Water starts flowing out of the steam nozzle. - Press the steam button 1 time. - The plunger moves down, but not all the way down (twice). - The plunger moves all the way down, water flows through the plunger, and the disc is ejected. P4 appears. Disconnect the coffee maker from the power supply. Reconnect the coffee maker to the mains, turn it on and the calibration is complete.</br></br></br></br></br></br></br></br></br></br><./br></br></br></br></br></br></br></br></br>

Hi, even though this post is old. Have one with display and wanted to reset what did not work. Understand that with the water tank on de kaffeesatzbehälter not. Now the machine hangs and the water valve no longer finds its position. Can you help?

QUOTE (nrom38846 @ Sunday, 09 October 2022, 20:42)

QUOTE (guest_HaWe @ November 28, 2020 05:22 pm) KRUPS EA81* Reset with or without cleaning slide. Trester container and water container LED flashing. Attempting to change grinder setting, grind time, grind quantity, coffee powder quantity following a procedure described in the forums usually renders the machine unusable. Trester container and water container LED flashing after restart, no button input possible anymore, machine does not heat. In a forum, an unknown forum user has described a possible RESET for all those affected. I emphasize explicitly that I am not the tinkerer of this procedure, the credit goes to an unknown. I merely transcribed the procedure into a readable form and added a few steps. I tried it on a machine WITHOUT a cleaning carriage. It works !1. turn off the power</br></br> (unplug it)2. water tank, pulp container, cleaning slide (if any)3 . set the flow control to 20ml4 . press and hold the "strong coffee" button on the far right and plug it in5 . all LEDs are on, water tank full, grounds container, cleaning slider (if present) reset 6. Adjust the flow regulator until all LEDs are off (about the middle position) 7. Place the container under the coffee spout and steam nozzle, now press the "weak coffee" button8 . Water is pumped through the coffee spout and the steam nozzle, the brewing piston moves to the upper edge of the brewing chamber. The process is repeated twice. After that, all red LEDs are off9 . Press the "weak coffee" button again10 . The machine lowers the brewing piston twice, the last time the brewing piston remains in the lowest position</br></br>. When "all LEDs are flashing" 11. Unplug the machine and wait at least 5 seconds12 . Plug in the power plug, the brewing piston will move to its initial position. The machine will work again. </br></br></br></br></br></br></br></br></br>.</br></br></br></br></br></br></br></br></br>. For all users with display machines such as EA8150, etc. Step by step for grinder calibration: - Unplug the coffee maker from the mains. - Remove the water container, coffee grounds container and the tray above the coffee grounds container. - Press the arrow button while reconnecting the coffee maker to the mains. - Press the START button once and the brackets [ ] will appear on the right side. - Press the START button once and 3 zeros will appear inside the brackets [000] on the left side. - Place the water tank and tray on top of the coffee grounds container and the coffee grounds tray. - Now press the START button. P2 will appear. - Press the steam button once to start diagnostics. - Water starts flowing out of the steam nozzle. - Press the steam button 1 time. - The plunger moves down, but not all the way down (twice). - The plunger moves all the way down, water flows through the plunger, and the disc is ejected. P4 appears. Disconnect the coffee maker from the power supply. Reconnect the coffee maker to the mains, turn it on and the calibration is complete.</br></br></br></br></br></br></br></br></br></br><./br></br></br></br></br></br></br></br></br>

Hi, have 8155 with display. Have tried to reset. Doesn't work though. Do not understand the point after the 3 zeros. Put the water tank on the coffee grounds container or something like that. Can someone please explain this to me? The machine now always drives the water valve or ceramic valve through when switching on and does not find the position. In addition, a relay on the circuit board clacks. I just do not understand the reset....gruss