Saeco Nova "Fill water tank"

Hello,

has recently had the problem filling my Saeco Nova in the display the message
" water tank, bleeding hot water " indicates.
water tank is but filled, and bleeding the hot water.
Now unfortunately there was no coffee, because it doesn't go on thanks to the message.
Had anyone ever had this problem ??
If yes, how can I fix it ??

Thanks ;-)))

Flowmeter or pump defective.

no not pump and or flowmeter defective, 99% of the flowmeter is clogged, there is nothing rotating around it anymore and there are no signals to the circuit board

--------------------
Alle Tips und Hinweise erfolgen nach bestem Wissen - die Verantwortung trägt jedoch der Ausführende.
Daher bitte lieber einmal zu viel als einmal zu wenig fragen.

Vor allen manuellen Arbeiten am Gerät den Netzstecker ziehen !

Maybe simple, but it worked for me:
In the water tank there is a rectangular box with a float.
The float sometimes gets stuck. Loosen with a pointed object.

THANK YOU
had this "water tank fill" problem with a SAECO ROYAL DIGITAL ...
very simple - forgot to use the float again after cleaning
THANK YOU
LG

Hello in the forum and first I wish everyone a happy
Easter.
Your forum here has put me on the track. Also with my machine the float stays down in its extra box after the filling and I have to shake and shake the tank before I can use it again with a float that has arrived at the top again.

I'd rather ask the layman one more time about the safely installed one:
Can I remove the lid of the float housing and clean or work the float or the inside of the housing in any way so that it rises again by itself when water is filled into the tank??

Greß Klaus

yes, the lid is mostly glued.if you have the float down, shake it out and then cut it open with a hacksaw, so once crossways and not lengthways!then look at the crap in there quietly, magnet back in, best in new, styrofoam plug in and the previously cut off lid again waterproof gluing goes well with superglue or with soldering iron, just must be waterproof, then test if the swimmer swims in 99.5% of the cases also does that

--------------------
Alle Tips und Hinweise erfolgen nach bestem Wissen - die Verantwortung trägt jedoch der Ausführende.
Daher bitte lieber einmal zu viel als einmal zu wenig fragen.

Vor allen manuellen Arbeiten am Gerät den Netzstecker ziehen !

Thanks for the tip, he helped.
But I didn't dare to cut it.
A little cube of polystyrene under the magnet tuts too.
Even refill the water - message comes at the correct time.

greetings Klaus