Siemens or Jura

Hello!
We want to buy a fully automatic coffee machine, price up to 600,- Euro. What is most important to us is that the workmanship of the device is right and that our new KV is not repaired more often than at home. He should make 5-10 cups of coffee a day, 2 of them cappuccino with frothed milk. We have now taken a closer look at the Siemens TK 56001 and the Jura Ena 3, which would you prefer and why? The Delonghi devices in the price segment did not give me any confidence arousing impression, the case and the brewing group seemed so "cheap"!

Many thanks
and love greetings Sabrina

Hello,



would recommend the Jura ENA 3 with Auto Cappuccino Frother (accessory).
Since it really has a good workmanship and an easy operation and it is also as far as I really think of it a little quieter in the preparation

--------------------
Kaffeevollautomaten:
Delonghi ESAM 3000B (2 Moante sehr zufreiden)
Saeco Talea Ring Plus (3 Monate UNzufreiden)
Jura ENA5 (1 Jahr super zufrieden)
Siemens EQ7 (8 Monate Anfangs toll dannach genervt 2 x zur Reparatur einmal neue BG ueber Support angefordert)
WMF 800 seit 1.12.09 Klasse
Siebträger
Bezzera BZ07 DE mit Bezzera BB005 Timer (Mühle) seit Mai 2011
Nespresso Krups XN 2720 für die Arbeit

Thanks for your quick answer!
What's not quite clear to me about the Ena 3, does it have to cool down before I can make another cup of coffee after frothing up the milk, or is it quite fast with her? I've read a lot of information about fully automatic machines and read that there are "2 heating circuits" or so, because otherwise you have to wait forever. Would be great if you could write about it again!

Thank you

LG
Sabrina

The ENA must briefly heat up before steam production (a few seconds), but is then immediately ready for coffee again and does not have to be vented. I would also recommend the ENA or the C5 for your needs.

--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

As numberonedefender already wrote, the waiting time between frothing up the milk and getting coffee is very short in the BD it says 40sec but most of the time around 20-30sec.
The C5 has the advantage that you have a button for espresso and cup of coffee.
At the ENA this must be done either in the menu under product (see here also on the Jura page the Knowelge Builder) or you press the Rotary Switch for two seconds then the display shows "Enough KAffee" and you can cancel the process when the cup is full.

--------------------
Kaffeevollautomaten:
Delonghi ESAM 3000B (2 Moante sehr zufreiden)
Saeco Talea Ring Plus (3 Monate UNzufreiden)
Jura ENA5 (1 Jahr super zufrieden)
Siemens EQ7 (8 Monate Anfangs toll dannach genervt 2 x zur Reparatur einmal neue BG ueber Support angefordert)
WMF 800 seit 1.12.09 Klasse
Siebträger
Bezzera BZ07 DE mit Bezzera BB005 Timer (Mühle) seit Mai 2011
Nespresso Krups XN 2720 für die Arbeit