Advanced search

back

New Topic

tap open - system fills - tap closed

F50 defective?

fanatisch74

November 04, 2010 09:28 pm

*

Coffee drinker

Group: Mitglieder

Posts: 1

Member No.: 10315

Joined: November 04, 2010

Hi,

After a filter change of my Jura F50 the machine is in a mode which is described as follows:

After switching on the F50 it appears - tap on - I follow the instruction, then appears - system fills - for about 15 sec. - then appears - tap closed - I follow the instruction. Now the game starts again from the beginning.

Levely I have no chance to get out of this loop, have tried everything.

What can I do? Is there possibly another possibility before I send in the F50?

LG and thanks in advance for the help
Christian

numberonedefender

November 04, 2010 11:31 pm

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

Sounds like a problem with the flowmeter, with a little luck (in the truest sense of the word) a thorough decalcification solves the problem, but otherwise it's not too big a deal if you dare to open the machine...
Edit: By the way, you should completely do without the filter, if necessary the machine simply pulls air somewhere. Try again without the filter in.



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Gast_TBM

May 01, 2014 10:51 am

Unregistered

HI

exactly the same problem i have also, recently changed the filter, since this morning my F50 hangs tightly in the loop tap (system is filled) - tap too - tap on.......... as described above.

Had I already tried without a filter, how do I get out of this loop to decalcify the machine ???

Had someone a tip or the right solution ??


Thanks in advance

Martin (Hobbytechniker)

May 01, 2014 03:45 pm

*

Expert

Group: Mitglieder

Posts: 1382

Member No.: 22501

Joined: November 20, 2013

It will probably be the flowmeter... renewing would be a solution...

Gast_TBM

May 02, 2014 08:41 pm

Unregistered

QUOTE (Martin (hobby technician) @ Thursday, 01. May 2014, 15:45 hrsMay 2014, 15:45 hrs)
It will probably be the flowmeter... replacing it would be a solution...

Thank you, I just ordered the part, 20 Euro ( incl. shipping ) will exchange it anyway and then report, hope I won't have to send it in.

Thank you till then

Gast_TBM

May 04, 2014 12:31 am

Unregistered

--emo&:)-->smile.gif.....
Thanks again with the tip @ Martin , will replace the flowmeter at the next rumzicken .


MfG TBM

numberonedefender

May 04, 2014 12:32 pm

*

Expert

Group: Mitglieder

Posts: 2539

Member No.: 2650

Joined: August 21, 2008

I have never had a faulty flowmeter on several hundred machines before, at most the seal in the lid was once over, otherwise it was always sufficient to clean it...



--------------------
Grüße, Manuel

Jura ENA Micro 9 (Küche)
Jura xF50 (Büro)
wechselnde Besetzung in der Werkstatt...
P.S.: Support gibt's im Forum, nicht per PN o.ä.

Gast_Jochen

January 21, 2020 03:56 pm

Unregistered

QUOTE (Guest_TBM @ Thursday, 01 May 2014, 10:51 am)
HI

exactly the same problem i have, recently i changed the filter, since this morning my F50 is stuck in the loop tap on (system is being filled) - tap off - tap on......... as described above.

I have also tried without filter, how do I get out of this loop to decalcify the machine ???

Does anyone have a tip or the right solution?


TIA

Plug out, plug in again! It worked for me!

sc978   

December 11, 2020 12:18 pm

Unregistered

Had the same problem with my Jura D60. After filter change: Tap on system fills, tap closes.
The water unit draws air. Problem was an almost invisible hairline crack at the top of the filter. New filter installed and the problem was solved immediately.
Happy holidays!

FloS

January 10, 2021 08:21 pm

Unregistered

QUOTE (sc978 @ Friday, 11 December 2020, 12:18 PM)
Had the same problem with my Jura D60. After filter change: tap open system fills, tap closed.
Water unit draws air. Problem was an almost invisible hairline crack at the top of the filter. Installed new filter and problem was fixed immediately.
Happy holidays.


Hey. Just had that problem too. Added some vinegar to the water in the tank two three times, then ran it again.
Ran the whole water tank through once, then flushed with clear water a few more times. Runs.

Schlawi

January 10, 2021 09:08 pm

*

Expert

Group: Mitglieder

Posts: 1194

Member No.: 14628

Joined: December 26, 2011

Essig?wacko.gif

Gast_John

December 31, 2021 09:05 pm

Unregistered

QUOTE (sc978 @ Friday, 11 December 2020, 12:18 PM)
Had the same problem with my Jura D60. After filter change: tap open system fills, tap closed.
Water unit draws air. Problem was an almost invisible hairline crack at the top of the filter. Installed new filter and problem was fixed immediately.
Happy holidays!


After replacing the filter, the Jura D60 runs again. Thanks for the tip! saved a lot of money!

back

New Topic

Print this topic
Next Oldest Next Newest